Spend your time 'tooning, not wiring.

This EzAcDc Snap Together Pontoon Boat Wiring Harness will take days off your boat wiring project.

Simply snaps onto EzAcDc panels and parts.

Every connection simply "snaps together" on this fast install harness that handles most pontoon boat functions. Or, it also includes simple connectors that easily connect your current boat parts.

Snaps together to all EzAcDc panel, light, and pump kits quickly and correctly. It arrives ready to install with breakouts for our

• Horn
• Red and green sidelights
• White all-round stern light
• Aerator pump
• Docking lights
• Courtesy lights

...or use the included adaptors to control these same functions with your current boat parts

This harness will work on pontoon boats up to 30 feet long depending on the arrangement of your helm, your forward navigation lights, and your battery. Verify our harness will fit your boat with our handy boat wiring harness diagram.

• Includes downloadable detailed easy-to-follow installation instructions
• Built safe. Circuit protected harness is properly sized to assure proper voltage over length of runs
• Built smart. Constructed with corrosion-resistant tinned copper boat wire and top level OEM components
• Easier wire routing. Multi-strand wire is incredibly flexible - a real plus when positioning the harness in tight locations
• Ready for any boat. Harness is easily adapted to non-EzAcDc components

We work hard to make your job easy...

Take the hours and confusion out of your boat wiring project. The boat building professionals at EzAcDc offer marine electrical parts that are engineered to "snap together" quickly and correctly - right out of the box.

It used to be that...

One of the more complicated, mysterious, headache inducing, and potentially dangerous do-it-yourself jobs was an electrical wiring project. And, if that wiring just happened to be a marine electrical one, the mysteries, headaches, expenses and risks became even more daunting.

It used to be that...

Even a seemingly simple boat wiring project often became much more complicated than its "on shore" equivalent for many reasons:

• The lack of boat wiring diagrams.

• The regular use of non-standard and non-traceable boat wire colors. Or, worse, the all-too-common practice of wiring an entire boat with only one color of wire.

• The joy of troubleshooting floating or loose grounds - or, as often happens, the ground for one component being grounded through some other component!

• The surprising and hazardous voltage drops caused by improperly gauged boat wiring.

• The fuses or circuit breakers were incorrectly sized or located - leading to continual "nuisance" tripping - or, much worse, to a genuine danger to you, your guests, or your boat.

It used to be that...

The only real alternative to solving these marine electrical issues yourself was to pay a fortune to your local marina or dealer to solve them for you.

But now...

We work hard to make these jobs easy with our with the EzAcDc Snap Together Marine Electrical Systems for boat wiring.

Originally developed for high-volume professional boat builders - where quality assurance is never negotiable - our Snap Together Marine Electrical Systems offer a simple and safe alternative to previously complicated boat wiring jobs And EzAcDc has marine electrical parts for many sized boats - whether you're working on a fishing boat wiring, pontoon boat wiring, sailboat wiring, right up and including small cruiser wiring with the most advanced marine electrical demands.

But now...

All Snap Together Marine Electrical System componentsare lab tested and certified as meeting or surpassing EzAcDc boat wiring quality and safety standards, and are configured to function as a part of your Snap Together Marine Electrical System Solution. So, when you install these components on your boat, EzAcDc engineering has made certain that your boat wiring job will:

• Go together quickly and correctly by allowing you to "Snap Together" every part of your marine electrical system - EzAcDc boat panels to EzAcDc boat wiring harness to EzAcDc boat navigation lights, bilge pumps and livewell pumps, boat horns, battery switch systems, and other EzAcDc boat wiring components -

• Never have problems with incorrect polarity and poorly made boat wiring connections,

• Eliminate unforeseen and unexpected voltage drops that can damage your marine electrical parts and make your boating trips dangerous

• Have easy to trace wire runs - which helps you to avoid the wonderful experience of discovering that the "right" switch is now controlling the "wrong" function after far too many hours of work.

• Help to protect the safety of your family, boat, and project with correctly calculated circuit breaker protection throughout your boat wiring harness

• Meet US Coast Guard safety standards by specifying the correct gauge boat wiring so as to minimize voltage drop over the length of every wireing run

• Last for the long haul - and under critical conditions - by using only top quality OEM components, including UV resistant boat panels, long-lasting LED boat navigation lights, battery switch systems, bilge pumps and livewell pumps and boat horns - all connected with the industry's most corrosion-resistant tinned electrical wiring.

But now...

Snap Together Marine Electrical Systems, available worldwide exclusively through EzAcDc, are a major advance in DIY boat wiring projects. Please contact us with any questions that you might have about these marine electrical products - or for other components that you would like to see added to our selection of boat wiring products.

For additional boat wiring and marine electrical information, we highly recommend our homophonous pals, Easy Ac/Dc.