Extend your fun with lights for night runs

Be safe by being seen during late night and early morning runs. This complete Attwood LED system allows you to add or upgrade navigation lights quickly and correctly.

• Keeps you, your passengers and boat safer after dark
• System simply snaps onto any EzAcDc harness
• Never change a bulb again - LEDs rated for 50,000+ hours of use
• Sealed lights are completely waterproof
• Extremely low amp draw means more time on water
• Includes all parts and easy-to-follow instructions
• Quickly and correctly connects to any EzAcDc harness
• This kit includes
   
  • 1 Vertical/wall mount red LED sidelight with stainless steel cover
  • 1 Vertical/wall mount green LED sidelight with stainless steel cover
  • 1 Round plug-in light base with stainless steel cover
  • 1 42" All-Round LED pole light with articulating head
• Also includes adaptors to easily connect to your current harness

This kit is ideal for boats up to 39.4 ft (12m) with vertically/wall mounted red and green lights installed on separate sides of the boat and a removable stern light on the centerline of the boat.

This easy-to-install EzAcDc Navigation Light system is centered around Attwood lights, the best LED navigational lights in the world. They are completely waterproof and are rated for over 50,000 hours of use. Not only do they exceed all US Coast Guard requirements, they have the lowest power draw of any nav lights manufactured today - which means more energy available for powering your boat and enjoying time on the water.

This professionally engineered OEM-quality kit arrives at your door ready to install. Once installed, your new lights will easily QuickConnect to any EzAcDc boat wiring harness - or use the included adaptors connect to your current boat wiring.

As with all of our products, EzAcDc engineering helps to make your nav light project simple, smart, and safe. The kit wiring is 100% multi-strand tinned copper wire that offers superior corrosion protection and easy wire routing. And, when mated to an EzAcDc boat wiring harness and EzAcDc switch panel, you can be certain that your circuit protection exceeds marine industry boat electrical standards.

About Attwood

EzAcDc is proud of our partnership with Attwood, the number one supplier of components to the marine industry. Attwood has over one hundred years of experience in designing and manufacturing products specifically for use in harsh marine environments.

Why Attwood LED Navigation Lighting?

Engineered to Last

Attwood presents the most energy efficient LED navigational lights in the world.

Through the use of proprietary optical design techniques, they have optimized their lens design to harness nearly 90% of all light being generated by the LED. In doing so, their line of LED series navigational lights exceed US Coast Guard requirements with the fewest and lowest watt LEDs of any navigational light manufactured today. Less energy used by navigational lighting means more energy available for powering your boat and enjoying time on the water.

Ingenuity

As the leader in the marine lighting design, Attwood understands the demands of the marine environment.

• Completely sealed LED units resist water intrusion, electrostatic discharge, (during assembly) vibration and ultraviolet light (UV) radiation.
• Reverse polarity protection has been added to eliminate potential mis-wiring damage during installation. their LED navigational lighting also features high quality electro-polished stainless steel covers designed to resist corrosion in even the most extreme saltwater environments. The result? Style and durability.
• Most importantly, Attwood lights are built to stand the test of time. Rated for 50,000+ hours of use and protected by a 10-year warranty, you can count on Attwood products to light your way for years to come.

We work hard to make your job easy...

Take the hours and confusion out of your boat wiring project. The boat building professionals at EzAcDc offer marine electrical parts that are engineered to "snap together" quickly and correctly - right out of the box.

It used to be that...

One of the more complicated, mysterious, headache inducing, and potentially dangerous do-it-yourself jobs was an electrical wiring project. And, if that wiring just happened to be on a boat, the mysteries, headaches, expenses and risks became even more daunting.

It used to be that...

Even a seemingly simple boat wiring project often became much more complicated than its "on shore" equivalent for many reasons:

• The lack of boat wiring diagrams.

• The regular use of non-standard and non-traceable boat wire colors. Or, worse, the all-too-common practice of wiring an entire boat with only one color of wire.

• The joy of troubleshooting floating or loose grounds - or, as often happens, the ground for one component being grounded through some other component!

• The surprising and hazardous voltage drops caused by improperly gauged boat wiring.

• The fuses or circuit breakers were incorrectly sized or located - leading to continual "nuisance" tripping - or, much worse, to a genuine danger to you, your guests, or your boat.

It used to be that...

The only real alternative to solving these issues yourself was to pay a fortune to your local marina or dealer to solve them for you.

But now...

We work hard to make these jobs easy with our with the EzAcDc QuickConnect Marine Electrical Systems for boat wiring.

Originally developed for high-volume professional boat builders - where quality assurance is never negotiable - our QuickConnect Marine Electrical Systems offer a simple and safe alternative to previously complicated boat wiring jobs And EzAcDc has marine electrical parts for many sized boats - whether you're working on a fishing boat wiring, pontoon boat wiring, sailboat wiring, right up and including small cruiser wiring with the most advanced marine electrical demands.

But now...

All QuickConnect Marine Electrical System components are lab tested and - if certified as meeting or surpassing EzAcDc boat wiring quality and safety standards - are configured to function as a part of your QuickConnect Marine Electrical System Solution. So, when you install these components on your boat, EzAcDc engineering has made certain that your boat wiring job will:

• Go together quickly and correctly by allowing you to "QuickConnect" every part of your marine electrical system - EzAcDc boat panels to EzAcDc boat wiring harness to EzAcDc boat navigation lights, bilge pumps and livewell pumps, boat horns, battery switch systems, and other EzAcDc boat wiring components -

• Never have problems with incorrect polarity and poorly made boat wiring connections,

• Eliminate unforeseen and unexpected voltage drops that can damage your boat wiring parts and make your boating trips dangerous

• Have easy to trace wire runs - which helps you to avoid the wonderful experience of discovering that the "right" switch is now controlling the "wrong" function after far too many hours of work.

• Help to protect the safety of your family, boat, and project with correctly calculated circuit breaker protection throughout your boat wireing harness

• Meet US Coast Guard safety standards by specifying the correct gauge boat wiring so as to minimize voltage drop over the length of every wireing run

• Last for the long haul - and under critical conditions - by using only top quality OEM components, including UV resistant boat panels, long-lasting LED boat navigation lights, battery switch systems, bilge pumps and livewell pumps and boat horns - all connected with the industry's most corrosion-resistant tinned electrical wiring.

But now...

QuickConnect Marine Electrical Systems, available worldwide exclusively through EzAcDc, are a major advance in DIY boat wiring projects. Please contact us with any questions that you might have about these marine electrical products - or for other components that you would like to see added to our selection of boat wiring products.

For additional boat wiring and marine electrical information, we highly recommend our homophonous pals, Easy Ac/Dc.

This EZACDC Attwood LED Navigation light kit contains 3560PF1, 91024PF1, 5530-42-1, and EZH-013

Similar Attwood LED Navigation lights include 3560-1, 3560-7, 91024-1, 91024-7, 5530-42-1, and 5530-42-7