Snap Together Automatic Bilge Pump System

Paypal Bill Later image
Click to learn what this thing does Click to see a cheaper alternative to marine electrical panel. How big is this marine electrical panel? Click for shipping info and rates

Boating's Best Bilge Pump

Keep the water in the lake - automatically

Easy to install kit automatically pumps water out of your boat. Connects quickly to any EzAcDc boat wiring harness or switch panel

Superior performance and easy installation make this EzAcDc automatic bilge pump kit a great addition to your boat wiring project.

This kit contains:

  • One Attwood Tsunami Bilge Pump with Snap Together Connector
  • One Attwood Float Switch with Snap Together Connector
  • Five feet of bilge pump hose
  • Two stainless steel hose clamps
  • One polypropylene thru hull fitting
  • Two Snap Together Connector adaptors

When designing this kit, the obvious choice for our pump was the Tsunami from Attwood, the marine industry's most trusted manufacturer of boat accessories. Boating's best bilge pump was then coupled with the equally excellent Attwood automatic float switch. Both arrive at your door ready out-of-the-box to easily Snap Together to other EzAcDc components, including our harness and panel kits. Or, the automatic bilge pump kit will also work great with your existing boat wiring and components.

Plus ready to get started on your project, and not waste your weekend searching for additional parts? Good, because in addition to one of the finest bilge pumps available, the EzAcDc bilge pump kit comes complete with properly sized hose, hose clamp and thru-hull - so you are ready to go.

As with all of our products, EzAcDc engineering helps to make every part of your boat wiring project simple, smart, and safe. When connected to EzAcDc products, you are assured of industry standard circuit protection.

Marine's Best Bilge Pump

Attwood, the marine industry's largest and most trusted manufacturer of boat accessories, is famous for their superior bilge and aerator pumps - and the 500 GPH Tsunami is no exception. It is durable and designed to last, too. The efficient design circulates water around the pump motor housing, helping to absorb the heat given off by the operating motor extending the life of the entire unit.

Attwood uses the most advanced material available, including the best quality bearings and state-of-the-art brushes, alloys and magnets. Their patented shaft seal centers directly on the motor shaft, preventing leaks caused by misalignment and the exclusive molded two-wire seal is permanently fused to the insulation to prevent a leak path.

Finally, the pump's wiring is caulked and tinned to eliminate wicking, prevent water damage and resist corrosion.

As with all of our products, EzAcDc engineering helps to make every part of your boat wiring project simple, smart, and safe. When connected to EzAcDc products, you are assured of industry standard circuit protection.

If you need any additional information, please call (231) 889-7220, send us an email at support@ezacdc.com, or read through other customer questions about Attwood bilge pump systems.

Similar Attwood tsunami bilge pumps include 4606-1, 4606PF1, 4606-7, 4608-1, 4608PF1, 4608-7, 4612-1, 4612PF1, and 4612-7