Comments for Boat Wiring - Easy to Install - EzAcDc Marine Electrical

Comment on Tinned Boat Wiring by Too much of a good thing? | Pontoon Boat Wiring

Too much of a good thing? | Pontoon Boat Wiring — Mon, 13 Feb 2012 20:22:33 +0000

[...] am rewiring my outboard engine. I have already purchased 2 gauge rust-resistant tinned wire. Then I checked the existing boat wiring and figured out it that it is 4 [...]

Comment on Easy Add AC Systems by Trip Wire | Boat Wiring Advice - Easy Ac/Dc Marine Electrical

Trip Wire | Boat Wiring Advice - Easy Ac/Dc Marine Electrical — Mon, 13 Feb 2012 19:51:07 +0000

[...] boat wiring currently has a shore power charging system, and an alternator on the [...]

Comment on Easy Add AC Systems by Shore Power Specifics | Boat Wiring Advice - Easy Ac/Dc Marine Electrical

Shore Power Specifics | Boat Wiring Advice - Easy Ac/Dc Marine Electrical — Mon, 06 Feb 2012 17:58:29 +0000

[...] am really impressed by the Easy Add AC Shore Power System that you designed for your partner boat wiring [...]

Comment on Tinned Boat Wiring by Glen-L Wiring | Marine Ac/Dc

Glen-L Wiring | Marine Ac/Dc — Mon, 30 Jan 2012 21:06:22 +0000

[...] would run 8 AWG tinned wire for your trolling [...]

Comment on Livewell Kits and Pumps by Glen-L Wiring | Marine Ac/Dc

Glen-L Wiring | Marine Ac/Dc — Mon, 30 Jan 2012 21:00:15 +0000

[...] either run a second pump from one of the switch panel accessory wire breakouts or you can use the livewell pump breakout for a second [...]

Comment on Livewell and Bilge Pumps by Glen-L Wiring | Marine Ac/Dc

Glen-L Wiring | Marine Ac/Dc — Mon, 30 Jan 2012 20:59:50 +0000

[...] Bilge pump wiring for two pumps [...]

Comment on Boat Horns by Glen-L Wiring | Marine Ac/Dc

Glen-L Wiring | Marine Ac/Dc — Mon, 30 Jan 2012 20:58:37 +0000

[...] Connection for an electric boat horn [...]

Comment on Automatic Smart Battery Switch by Glen-L Wiring | Marine Ac/Dc

Glen-L Wiring | Marine Ac/Dc — Mon, 30 Jan 2012 20:58:21 +0000

[...] Smart Battery Switch system for two batteries. This includes cables, ground bus, and you will want to add a couple of battery boxes. [...]

Comment on Navigation Lights by Glen-L Wiring | Marine Ac/Dc

Glen-L Wiring | Marine Ac/Dc — Mon, 30 Jan 2012 20:58:04 +0000

[...] Navigation lights (2 for bow red and green plus one for stern white) [...]

Comment on Tinned Boat Wiring by Grounding Pipe? | Boat Wiring Advice - Easy Ac/Dc Marine Electrical

Grounding Pipe? | Boat Wiring Advice - Easy Ac/Dc Marine Electrical — Mon, 23 Jan 2012 21:43:43 +0000

[...] that is correct they used a straight single copper wire for the bonding, versus tinned stranded wire. They ran the bond wire from the bonding plate to each item, drive shaft packing flange, engine, [...]